As the name suggests, the Versaflex is one of our most versatile portable banner stand displays. The combination of adjustable height from 48" to an incredible 120" tall and a bottom graphic rail that can move up and down the support pole make for a seemingly infinite number of banner size options. There are even three different positions on the graphic rail where the banner can be attached so the amount of the graphic rail that remains visible can be controlled. Circular hubs on the support pole provide 8 attachment points for the graphic rails. This allows the Versaflex banner stand to be used with a single support pole behind the banner where it's not seen from the front, and this configuration provides excellent stability in most indoor locations. For even greater stability in indoor environments with special needs, a second support pole can be added. This extra support pole can also be positioned behind the banner so it's not visible from the front, or the support poles can be placed at either end of the graphic rails to frame the banner. In either configuration, the Versaflex can be made double sided, either by adding another banner with graphic rails to attach to the hub so the banners are back to back with the support pole in between, or with the support poles at the ends, a double sided graphic can be used since the support poles don't obscure the banner from the back side in that set up.
When adding multiple stands together, the options increase dramatically. With the support poles behind the banners, the stands can be connected in a nearly seamless straight wall and there are special connectors to join the graphic rails together. With the support poles at the ends of the graphic rails, the circular hubs allow additional stands to be connected in a straight line or at angles to create straight walls, curved walls, or box shapes.
Because the bottom graphic holder can move up and down the support pole, many different banner sizes are possible with this stand. A popular option is to use a shorter banner that is displayed off the ground so the top of the banner is at a height that will get attention without the expense of a taller banner that reaches the ground. See the product photos for examples of the types of shapes and sizes that can be created with the Versaflex.
The telescopic support poles are anchored by a 16.5" x 13.5" base that weighs 5.2 lb. for excellent stability. As mentioned above, there is also an option to add a second support pole and base for situations and environments that require extra stability, such as high traffic retail store locations.
Banner options are shown at the most popular heights of 72", 96" and 120", but other heights can be ordered by selecting the stand without a banner, then choosing a banner from the from the Related items tab or by going to the Replacement Banners section. For sizes and materials other than those shown, contact us for options.
The Versaflex 36 displays a graphic with a visual area of 35.5" wide x 48" to 120" high.
Comes in a silver finish with separate carry bags for the base and the support pole. The support pole carry bag has room for the graphic rails and banner.
Looking for a higher-end model?
There isn't a higher end model in this style and size.
Looking for a less expensive model?
The Portable Graphic Stand is a less expensive model that holds a 36" wide banner in a similar style with a center support pole. The banners attach with velcro on that model.
A hard shipping case can be an excellent investment, especially when traveling with multiple stands. The Expandable Shipping Case is the recommended product when a shipping case is needed, and it can be found in the Related Products tab.
A spotlight is a great accessory for banner stands when used at trade shows or other events. Because these venues tend to have poor lighting, display with lights really stand out, so it's a simple way to increase the impact of your displays. For this banner stand, the Versaflex 200 war floodlight is the recommended model. This can also be found in the Related Products tab or in the Display Lighting section of the main menu.
|Is a Featured Product||No|
|Free Ground Shipping||N/A|
Specs & Templates
Versaflex 36 Specifications
- Banner width: 35.5"
- Banner height: 48" to 120"
- Overall display height: 122"
- Footprint: 35.5" x 16.5"
- Shipping size, support pole: 51" x 6" x 6"
- Shipping size, support pole with graphic: 53" x 9" x 5"
- Shipping size, base: 19" x 15" x 5"
- Shipping weight, stand only: 15 lbs
- Shipping weight, with banner: 18 lbs
- Warranty: Lifetime Parts & Labor
Graphic templates are available in pdf and eps formats. Click their icons to download them. If you don't have a pdf viewing application, you can get Acrobat Reader free by clicking on the following link.
These templates provide a framework for designing your banner and show the live area as well as the leader portion of the banner that attaches to the banner stand and isn't visible when the stand is in use. If you would like a banner design, we offer those for a reasonable fee in the Banner Designs category.