QuickSilver Pro 36 Banner Stand
For a limited time, save 50% on the QuickSilver 36 with banner thanks to the Shop in Utah grant program! Use coupon code SHOPINUTAH at checkout for this special discount.
This discount is made possible by the Shop In Utah grant, and since that’s where we are located, we able to offer this tremendous discount on our best selling banner stand. The funds for the grant are part of the federal CARES Act, and the promotion runs until 12/30/20 or until the funds from the grant are used up, so be sure to take advantage of the savings while they last. The discount will be given on a first come, first served basis.
QuickSilver Pro retractable banner stands are our most popular style. This is a stand we engineered from scratch to create an affordable display with the advanced features we liked best in more expensive models. The QuickSilver Pro has been so popular that our competitors have created look alike models, but don't be fooled because those other stands don't offer the same value. QuickSilver Pro 36 has adjustable height from 35" to 96" so that it can be for anything from a tabletop display to a full height floor standing banner display. To make it easier to adjust the height, it has lever locks on the telescopic pole, which is a feature normally only found on high end models. It also has a tension adjustment control that makes it easy to add tension, or completely re-tension a banner should it ever come loose during shipping or when changing the banner. Without this feature, you could have to disassemble the entire stand or send it back for repair, which is common with other models.
Also called roll up banner stands or pull up banner stands, this style of banner display features a spring loaded roller that holds the banner under tension, and rolls it safely into the base for storage between uses. The QuickSilver Pro features a snap style top rail and low profile velcro attachment to a fabric leader on the roller. The velcro makes for quick and easy banner changes, and the fabric leader will never crack or tear like plastic leaders, making the stand more reliable over time. The QuickSilver Pro also offers chromed plastic end caps that attach with magnets for a finished look, and adjustable feet to help level the stand on uneven surfaces.
Banner options are shown at the most popular heights of 80", 92" and 96", but other heights can be ordered by selecting the stand without a banner, then choosing a banner from the from the Related items tab or by going to the Replacement Banners section.
The QuickSilver Pro comes in 6 different widths to satisfy the need for almost any size of display. It comes complete with a deluxe suitcase style travel bag with adjustable shoulder strap.
The QuickSilver Pro 36 displays a banner with a visible size of 35.5" x 35-92" or 38"-96" with an optional taller support pole.
Looking for a higher-end model?
An upgrade from the QuickSilver Pro 36 would require a change to a different width, since there are no upgraded models that hold a 35.5" wide banner. The Space Infinity is available in a 33.4" width, so if a banner that is a few inches narrower is acceptable, this would be a good choice. It also has adjustable tension and telescopic height from 35" to 84.7" and optional fixed height poles with heights of 84.6" or 94.5". It also has a removable roller with both snap rail and panel strip mounting options.
Looking for a less expensive model?
The Pacific 920 is the next less expensive model that holds the same width banner. The Pacific is a compact model with a swing out foot and a fixed height of 84". By stepping down to the Pacific 920, you give up the adjustable height with taller maximum height, tension adjustment, easier banner change, and deluxe carry bag.
The QuickSilver Hard Case will be an option that's available during checkout to substitute the hard case for the normal padded carry bag. For a larger, more heavy duty case, the Adjustable Banner Stand Case is our recommended option when a shipping case is needed. It can hold the QuickSilver Pro 36 banner stand with room for lights or other accessories. You can find the case by scrolling through the items in the Related Products tab.
The Silver Light and Silver Light LED are the recommended lights for use with the QuickSilver Pro. These can also be found in the Related Products tab.
|Is a Featured Product||No|
|Free Ground Shipping||No|
Specs & Templates
QuickSilver Pro 36 Specifications
- Banner width: 35.5"
- Banner height: adjustable from 35" to 92" plus 6" bottom bleed with standard pole and from 38" to 96" with optional taller pole
- Overall display height: maximum 97.5"
- Footprint 37" x 9"
- Shipping size: 41" x 13" x 6"
- Shipping weight, stand only: 17 lbs
- Shipping weight, with banner: 20 lbs
- Shipping weight in hard case, stand only: 24 lbs
- Shipping weight in hard case, with banner: 27 lbs
- Warranty: Lifetime Parts & Labor on stand, 1 year on hard case.
Graphic templates are available in pdf and eps formats. Click their icons to download them. If you don't have a pdf viewing application, you can get Acrobat Reader free by clicking on the following link.
These templates provide a framework for designing your banner and show the live area as well as the leader portion of the banner that attaches to the banner stand and isn't visible when the stand is in use. If you would like a banner design, we offer those for a reasonable fee in the Banner Designs category.
Templates for Standard Adjustable and Fixed Height Poles - Height up to 92"